Posts Tagged ‘circular needles’
Needle Tip: Circular Knitting Needles with Clear Tubing Cables
February 5, 2011 | 
Author A couple years ago I bought a bunch of bamboo needles direct from China, which you may have read here I had to sharpen as they were sloppily made. I got about 45 needles for about $40 US. Among these were two sets of circular knitting needles in two lengths, but I did like them because the clear vinyl tubing cables were sticky and the yarn would not slide on them easily.
Just solved that problem. I needed an unoccupied set of #3 us needles for a necktie I’m working on and grabbed one of these in desperation. Then it occurred to me to put a little oil from my forehead on the cable to occupy the tackiness with some molecules other than my yarn. It worked! I put on just a tiny bit and rubbed my fingers back and forth until they moved smoothly, and now as I knit the yarn doesn’t drag on the tubing. It doesn’t feel oily either.
Related Posts:
Need a couple DPNs? If you Have Options, You Have Options
I’ve been doing a little experimentation and designing for some minor pattern ideas that involved doing some i-cords, but they required a DPN of a certain size that I didn’t own. I popped in at Joann’s with one of my trusty 40% off coupons that blessedly rain from the sky these days and browsed the needle aisle. (By the way, do sign up for their email coupons at knitpicks.com)
A set of 4 Clover DPNs in the size 11 I was looking for would set me back about 12$ before the discount. That’s a lot to spend on an experiment, I thought, especially since I don’t use DPNs for anything, having nice sets of Options nickel and acrylic Zephyr circular needles. they have a nice taper at both ends…. Wait a second.
And there I realized I have all the DPNs I need. Without a cable these neat knitpicks.com circular needles sets can double for DPNs for my i-cord needs. they are a bit short for real DPN projects, but again, I don’t need them for that. So use your Options! Whether nickel plated tips, the Zephyr acrylics or the Harmony wood needles, make use of your resources!
Saved my coupon, saved my money. End of story.
You can easily knit past the threaded holes when they are playing left needle.
![Reblog this post [with Zemanta]](http://img.zemanta.com/reblog_e.png?x-id=61002633-afca-4b00-8b75-eff51ac6b291)
Related Posts:
Super Socks Solution
There’s a fine book called Socks Soar on Two Circular Needles by Cat Bordhi. As you can tell, I disagree with the sentiment. Sorry. Socks Suck on Two Circular Needles.
As of this writing I have just begun my first sock. I thank God there is more than one way, and especially that there is the magic loop method that uses one circular needle.
The idea of knitting a sock with a hedgehog of dpns was never attractive to me. Frankly, it also looks like bad feng shuei, what with all those needles pointing at everyone. So I never gave that method a thought. My cousin Leigh was going to try them but I’m urging her to use magic loop.
So I did at first test the method with two circular needles. For some reason I avoided the magic loop at first as it sounded too magical. Complete ignorance there. Anyway, the two circ method is done with one at the back of the sock and one at the front, with half the loops on each. In all honesty it was visually confusing to see both needles hanging there. Also, the weight of the back needle caused that half of the beginning of the sock to hang strangely and that only got me more confused.
Again, at first the magic loop seemed really alien. How could that even be possible? But having given up on the two circular method I had to try magic loop and it really is the best. It’s very easy to tell what you are doing, where you are, and repositioning the needles for the turn to the next half round is a snap. On two circs I was confused at that point also. I kept getting mixed up about which one to move in which direction. With one circular needle it’s very clear. There’s only one thing you CAN do. You just slide your filled up working needle out of the loops and your emptied left needle back into the other loops. The working end of your circular needle stays the working end, going round and round, chasing the other needle as you knit. Turn the work, move the needle tips to the start position and start the next half round. It is so easy! Good thing. I was running out of ways to knit socks!
I was also happy to see that there was not even the slightest sign of laddering at the turns, even without me pulling the yarn tight for the first stitch.
Here's my test tube. Even with this space between the left needle and the back cable there were no ladders.
There’s a little more to doing socks on one circular needle. This probably applies to using two circs as well. The best pictures of sock construction for this method I found are in How to Knit Socks: Three Methods Made Easy, by Edie Eckman. Apparently, there are ways to position various sections of the stitches for different parts of the sock, so do look into it before starting off.
I have the Sweater Workshop book by Jacqueline Fee which calls for dpns to knit sleeves and collars, so I did buy a set, but now that I’ve tasted the magic loop I think I can use it for that as well, so I ordered a sixty inch cable for my Options needles and will use that.
So there you go. I hope you enjoy, and if you use the other two methods or gave up on them do try the magic loop. I think you will be glad. Use a 40 inch circular to give yourself enough room.
And someone has a book on how to do two socks on one circular needle. I can see that would work as well, but you would have to contend with two sources of yarn, or more if you are doing multiple colors.
Thanks for stopping by and reading. Feel free to leave a comment.
- Eric
Related Posts:
Zephyr Acrylic Needles Review: Is Clear Too Clear?
UPDATE: I have found that the frost effect produced by the method below doesn’t necessarily last very long with the friction of the yarn over it, so I’m looking into better ways to frost the tips. You don’t want to keep going over them with steel wool as that will wear them down. I will say that you do get used to the clarity of the tips after a while, so you may not need to bother if your eyesight is good enough. Use them for a while and see what you think.
I got a sample of the new Knitpicks.com Zephyr acrylic Options circular needles and liked them a lot at first try, so I ordered a set. In the days before they arrived I played with them more and started to feel that I didn’t really like the glass-like clarity much. It made it harder to see what I was doing. I could see the yarn through the needles as well as in front of it and in placing the needle tip that made it a good bit less distinct than I preferred.
I don't like seeing the yarn through the needles like this.
In the mean time the box with my set arrived and I let it sit on the dining table until I could come up with a decision or solution. I looked on the internet for ways to stain the acrylic a less transparent color but found nothing. Then it occurred to me I could just make the tips frosted by going over them with steel wool.
The tape gives the frosting a nice, even edge.
So what I did was wrap some scotch tape around the needle one inch from the tip, nice and straight around the shaft. I tried some 000 steel wool but it didn’t give it enough of a frost, so I tried some #1 steel wool, which is courser. It does leave some faint lines in the surface but as it is more abrasive the overall effect was better frosting.
Twisting the tips evenly in the #1 grade steel wool.
You will want to experiment with how to do this; how hard to pinch and where. I wrapped the tip in a bit of the steel wool and twisted sideways, working my way to the tip and back, dusting it off and checking where I was missing. Then I went lengthwise toward the tip to give it a crosswise abrasion, then again did it twisting side to side. Dust off the tip on some cloth to see how it’s coming. Compare it to an untreated tip and see if it’s frosty enough. Remove the tape when you have the frost effect the way you want it.
The frostiness will be reduced by the angle of the lighting or oil from your hands. The one on the left has not been frosted yet.
I tested my first treated pair and find it is very satisfactory. The distracting transparency is much reduced. Additionally, the smoothness and slip of the needle tips is further reduced. Whereas the Zephyrs have a sort of faint creaky feeling or sound when new, the frosted ones feel and sound more like bamboo. This is fine with me as less slip is one of the reasons I got them.
If you try this you do it at your own risk. Be methodical. Also, be aware that steel wool sheds a lot, so do it over newspaper and be sure to dump the shed fibers in the trash. If they get on the rug and ever get wet they will rust and stain the carpet. You may want to vacuum when you are done for good measure. If you don’t like the frostiness you can reverse it SOME by using 0000 steel wool or maybe with clear nail polish.
So I decided to keep the Zephyrs. They do have the sharpness, friction and travel-worthiness I was looking for, and they do have a certain futuristic elegance.
Related Posts:
Posted in Products and Tools, Reviews, Updated Since Posted | 
Tags: circular needles, knitpicks.com, needles, Options Interchangable, review, tools | 
1 Comment »
Build Your Most Useful Needle Collection
So in the end, what needles to buy?
My thought is to save you some trouble. From my own experience I can suggest what may be the most usable needle collection for your convenience in most knitting situations.
When you start out into knitting you will want to t start with a small selection of different kinds of needles, meaning what they are made of, until you learn to knit with some degree of comfort and ease – just the basic skills in early practice – to give yourself the chance to try a couple of kinds of yarn, including wool, acrylic, rayon, cotton and maybe others. If you go to a yarn store or know another avid knitter you might be able to try a few of these. This will give you a feel for the difference between metal, wood, plastic and acrylic needles, but also you can try different point sharpness to see how you like that aspect. Bamboo tends to be duller and metal or acrylic sharper.
Also, as you learn to knit and control your tension, you will see differences in the tightness of your knitting as well as develop a sense of how you like to work. Along with the thinness of the yarn, these factors and what you plan to knit will influence your needle sharpness and needle material.
As a beginner my knitting is some times a bit tight so I prefer sharper needles. A slight drawback to sharp tips is it seems easier to split your yarn, but I think with sharper tips it’s easier to keep the yarn on the tip as you pull it through your loops.
You have probably read that different materials have different slipperiness for your yarn. This is the main consideration for needle choice. Until you get more dexterous at handling your needles and yarn you might prefer less slick needles. I like the feel of my nickel plated Options but I’m finding with the smaller needles sizes and thus smaller gauge I have less room to move and I’m more prone to slip up and lose loops off my needles.
The bamboo is going back to China
I’ve tried bamboo also. As I mention elsewhere, I prefer it smoother than how they come stock and go over them with 0000 super fine steel wool first. That takes the clear coating off and buffs the surface so there’s less tack.
Bamboo can be had for straight and circular and dpns. You may be tempted to stock up on a few sets of bamboo needles in different sizes and different lengths of circulars, which you can get fairly cheap off amazon.com. this may seem economical, as you can get 15 sizes in a set. But what if you need other lengths of circulars? At 25$ per set that will add up fast. Do you really want to spend that much?
As you knit or do a swatch you may need to change needle size to adjust your gauge, so you may indeed want more needles on hand. A set would make sense so you don’t have to run to the yarn store where you can be tempted to buy other things as well.
At this point, for all I’ve observed and tried, which now includes the new Zephyr acrylic circular needles from Knitpicks.com, if I were to lose all my needles or be starting out, I would buy just the Zephyr set of circulars as they can be used for circulars or straight needles. You could get a Denise set alternately, but I like the sharper Zephyrs.
Along with my Zephyr set I ordered an extra 60 inch cable so I can use it for a sort of magic loop approach to knit smaller diameter rounds. Often you need a 16 inch circular for sweater collars or perhaps a sleeve, or may need dpns for something. I’ve decided there’s no point in getting the dpns if I can use the 60 circular magic loop-wise. I haven’t tried it yet, but it seems pretty obvious it should work. If you can use it for socks you can use it for collars and sleeves, hats and more, even where you need a larger needle size.
Max and the new Zephyr Options Acrylic Needles
What else do you need? If you are into socks and mittens you may need some smaller needles, either dpns or 40 inch circulars for magic loop. Options needles go down to size 4US and Denise only go down to 5US. I’m going to lean toward working with worsted weight even for socks, which is fine on size 4. I’m not crazy yet about tiny needles, tiny yarn and that many more tiny stitches.
I think with this proposal you could get away with spending about $55 usd for your Zephyrs or Denise set, then another $20 or so for a set of cheap bamboo dpns if you need cheap small needles for socks and such. You can get some metal circular needles for around $15 each at 40 inches. So if you want to go that route for socks get size 2 and 3 US. Unless you really like the slickness of metal the acrylic Zephyrs or Denise should do you fine for most needs. PLUS these sets are more welcome on airplanes. I’m not so sure the wood Options are, although I would think so. Maybe if you hide them among your colored pencils when you board?
Related Posts:
Posted in Products and Tools | Tags: circular needles, knitpicks.com, Options Interchangable, review, tools | No Comments »
Knitting in the Sky
Knitpicks.com just released their new Options Zephyr Acrylic Interchangeable circular needles. They are CLEAR and light and slightly flexible, and they say they are allowed on airplanes. You may have heard of TSA agents confiscating knitting needles. Here’s what the TSA web site had on it today about traveling with you pointy things:
Transporting Knitting Needles & Needlepoint: Knitting needles are permitted in your carry-on baggage or checked baggage. However, there is a possibility that the needles can be perceived as a possible weapon by one of our Security Officers. Our Security Officers have the authority to determine if an item could be used as a weapon and may not allow said item to pass through security. We recommend the following when bringing knitting needles on an airplane:
- Circular knitting needles are recommended to be less than 31 inches in total length
- We recommend that the needles be made of bamboo or plastic (Not Metal)
- Scissors must have blunt points
- In case a Security Officer does not allow your knitting tools through security it is recommended that you carry a self addressed envelope so that you can mail your tools back to yourself as opposed to surrendering them at the security check point.
Most of the items needed to pursue a Needlepoint project are permitted in your carry-on baggage or checked baggage with the exception of circular thread cutters or any cutter with a blade contained inside. These items cannot be taken through a security checkpoint. They must go in your checked baggage.
So remember that padded postage paid envelope for your stuff if you can’t get your deadly needlecraft on the aircraft. The Zephyrs may be easier to pass, but don’t it’s better to be safe than sorry. If you are going to be away for a while you might send your knitting tools ahead by UPS or such, then ship it back.
Here are the new needles:
In the Ravelry SMACK (Straight Men Also Crochet and Knit) forum there is a thread on air travel with knitting. Some airlines and countries are very strict, such as Australia and their airline Quantas. Canada is supposedly very easy.
And some posters said they have even prepared pencils to knit with by coating the tips with clear nail polish. Others have successfully got onboard with bamboo dpns, stashing them among a few pens and pencils.
Note: also be aware that if you have large metal stitch holders you may not get them on board. Find an alternative.
Related Posts:
Needle Overview for the Beginning Knitter
What to buy? Everything? No. As fun as it is to buy new toys it’s best to learn some things first. I’ve found from my first explorations that there are ideal collections of needles for knitting. You will read that some yarn is more slippery so it is better to use bamboo with that kind, and other yarns are better on metal or other slick needles. Here’s my discoveries as I learned to knit.
At first I started with a set of aluminum needles from Walmart and the written instructions. I found it very frustrating trying to control the yarn on the slippery metal needles but that may have been, and most likely was, due to my choice of knitting method and lack of proper application. I almost quit a few times because of how slippery it was, and as I mentioned before, I came to feel like I needed to be an octopus to knit.
It was recommended in various places that bamboo is better for the beginner, but in my opinion maybe not. Bamboo does give you more control but it can also get a bit frustrating. One thing is that the points are duller, sometimes too dull, depending on the brand, and that can make it a bit harder to catch the yarn and pull your loops through your loops. If you are handy you can sharpen the tips a bit – be sure you keep a good taper. I haven’t tried this yet, but will soon.
Point Sharpness Varies. Top to bottom and all size 8 US: Clover bamboo, cheap bamboo, aluminum, Options Nickel-plated.
Another thing is that you may not like the lack of slipperiness with the yarns you will tend to use. It’s best to reserve bamboo for slippery yarns. If you want to have some around, you may not want to have them be your only set. Try some first, then buy more if you like them. Go to a real yarn store and learn about the yarns that will be better on bamboo and decide if you will ever really want to use it. Alternately, you may want to buy the bamboo and then make the slicker with polishing or even clear coating. (If you intend to clear coat with something like urethane or whatever, be aware some bamboo has been waxed and that can interfere with extra coatings.)
On my current exercise, which is the sweater sampler from The Sweater Workshop book, I started with a set of 16 inch bamboo circulars and didn’t like the friction of the needle so I used the 0000 super fine steel wool to polish them and I like the new surface better. It has some bite but the yarn slides better. This may be a good middle ground for you, and I will give any bamboo units I buy the same treatment.
Super Fine steel wool, marked 0000, is for polishing. It will remove any clear coat on the bamboo.
One reason to get bamboo is that you can get a set of fifteen sizes for about $25 on amazon.com and elsewhere. This is a great buy, and handy if you feel like having everything you need available in case you need to change needle size to adjust your gauge result for a project. Then you don’t have to run out trying to find what you want. If you don’t like the points you can, again, sharpen them.
By the way, sharpening should not be attempted with a blade. You will want a powered sander disk or belt. Ideally, I would use a stationary belt sander to get an even and quick taper, then fix the point the way you like it. Finish with 00 (double zero) steel wool and then 0000 superfine steel wool for your final shine – or whatever process it takes to get it smooth. If you have a buffing wheel you could use that but don’t use any compound.
BUT, as you will read below, you may find it more economical to get something like the Options wood or nickel circulars as they can be dual purpose, instead of spending money on a set of bamboo you may have to labor over to sharpen or polish if you aren’t totally satisfied with them. There are other brands of interchangeable circular needles. I chose the Options based on a very positive review and I’m very happy with them. Read on.
I liked bamboo at first but now that I have learned to control the yarn I don’t feel much need for its lack of slipperiness. When I got my new set of Options Nickel-plated interchangeable circulars – which you can use as “straight” needles by capping the cable with the “button” end that comes with it – I fell in love with the slickness. It’s like knitting on glass. Very sexy.
About controlling the yarn; at first I tried to learn regular continental and then English knitting but had trouble. I was very pleased with I found Portuguese knitting as yarn control is totally handled by the yarn around the neck or around a pin on your left shoulder. Then I discovered Eastern European knitting and I really like both the speed and yarn handing. I use both, depending on the project. I find Portuguese knitting is a bit better for bulky yarns – or maybe I just need more practice.
So on to the rest of the needle commentary. I mentioned my nice nickel Options set. I got them from knitpicks.com, the manufacturer and seemingly the only source. They were under $60 for the set, which comes with pairs of points for sized 4 through 11 and two pairs of cables to make two 20 and two 34 inch circulars. They come in a handy-sized bag to protect them from the cat and keep various parts and tools together.
Options Interchangeable come in a handy bag to keep everything together.
Like I said, you can cap the two cables and make each point into a one-ended knitting needle that is about 15 inches long. Or you can put both points on one cable and just turn your work like you normally would without joining to knit in the round. Voilá, you have a nice set of “straight” metal knitting needles as well as a set of metal circular needles. I’m going to use these for a flat scarf that is project #2 coming up, and also for a sweater that will be knit in the round. You can also get longer cables and also points up to size US 15, all purchased separately for a reasonable price. And of course if you prefer a bit more friction you can try the wooden version, which is rather colorful as well. I haven’t tried them so I can’t testify to what they are like but I’ve heard people like them plenty.
A single Options tip set up for use as a single pointed "straight" needle.
So, that handles all your circular and straight needle needs. What about smaller sizes? Usually this is for things like fine lace and socks. I don’t know a thing about lace, so you will want to read elsewhere for that. Socks are what got me into knitting – no, I haven’t started a set yet but I bought all I need – so I will address that part.
What I bought for socks is based on a middle of the road approach. Those pointy double pointed needles (dpns) look kind of scary, like massaging a hedgehog, so for starters I’m going to try the magic loop method, which recommends a 40 inch circular needle. I got Addi Turbo needles in nickel plate #2 US, as well as a 47 inch one in case I decide to knit two socks at once on separate needles, and some people suggest having the circular needles of differing lengths so you can tell them apart in case that is ever a challenge. That would depend on your pattern and where you are in it.
Socks and sweater sleeves and sometimes sweater collars and parts of hats and other stuff are often done on dpns. You can use circulars on these parts but at some lengths the cable may become an obstacle to wrestle with. Usually the pattern will suggest a 16 inch circular, which is pretty tight but not really hard to work with. I don’t own any in metal yet. They are pretty expensive, like 15.00 and up. You can also get metal in 12 inches. I bought a set of bamboo at 16 inches for $25 off amazon but as I said, I have to polish them with the 0000 steel wool to be happy with the feel of the bamboo on the yarn I’m using.
So for such applications it may be a good idea to get some dpns just in case. Recommendations I’ve found are to use bamboo or wood as they are less likely to slip out of your stitches, especially if you make a sudden move, like to free up your yarn supply. I don’t like the thought of trying to put stitches back on a needle so I’m going to get a set of bamboo. They come in various lengths so you will want to get a set that will suit your most likely projects. The set I found with five pieces is $20 now on amazon.com. I will probably get a set that are 8 inches long. Better too long than too short.
Another note on dpns: they come in sets of 4 and 5 and sometimes 6. You knit with all but one in loops and knit onto the empty one. You may prefer to own a set of 5 so you can have all your stitches split between front and back, especially for socks and if you are working with an even number of stitches, or if your stitches are divisible by three you can divide them on three needles and knit with the fourth.
So, here’s the summary:
I got my Options in nickel because I like the slickness and can use them as circulars or straights.
I found bamboo frustrating due to non-sharp tips and also higher friction before buffing with steel wool, and don’t think I will have much need for the friction for the yarn I’m likely to use. If you discover you want to use slippery yarns then get a set of bamboo straights for $25 off amazon.com or better yet, maybe a set of the wood Options Interchangeable Circulars which can be, again, be used as circulars or straights.
If you are nervous about knitting on slippery metal, get some expert help on yarn control and look into Eastern European or Portuguese knitting. And practice. You get better.
I bought 40 inch and a 47 inch #2 US Addi Turbos for socks for when I get around to that. Again, I like the metal.
I am ordering a set of 8 inch bamboo dpns for other uses in case I need them, again, so the needles will be less likely to slip out of my work.
I hope all this is of use to you. Nothing like the voice of a little experience, and that’s what I have – a voice and a little experience. If you have anything to add please leave a comment.
And here’s Max’s latest picture as official Knitty Kitty:
"Yarn makes a nice pillow. Wa-wa!"
Related Posts:
Posted in Products and Tools | Tags: amazon.com, Cat picture, china, circular needles, dpns, eastern european knitting, knit, needles, Options Interchangable, sleeves, Socks, Sweater Workshop book, wood, yarn | No Comments »
Bamboo, Bamboo, Bamboo
I just ordered some needles from China – a couple 15 pc sets of circs in 2 lengths, a set of 15 bamboo needles and a set of ten crochet hooks. It was a great buy. I just hope the quality is good. If not, I could them myself. I can smooth, sand, refinish or reshape if I need to, but it may end up being a lot of labor I don’t need.
I plan to use that also in a test to see if I can give them crochet tips myself, as I want to experiment with hook knitting. I tried it with some crochet hooks a few days ago and it was quite easy to knit that way. It was mentioned that they use hooked knitting needles in Portugal and elsewhere, so this may come in handy.
Related Posts:
Posted in Products and Tools | Tags: china, circular needles, crochet, needles, portugal | No Comments »
